Urgent position of Data Center Technician
Location : Ashburn, VA 20147
FACEBOOK ID is mandatory.
Job Duties and Responsibilities: –
Cabling & Termination: –
● The Fiber Technician must have basic copper termination skills
● The Fiber Technician will mount and install racks, patch panels, fiber optic and hardware. Install grounding for racks, equipment and cable as required.
● The Fiber Technician performs testing: continuity test horizontal and riser cable; use of volt-ohmmeter; troubleshoot opens, crosses, shorts and transpose pairs on horizontal and riser cable; use a tone set.
● The Fiber Technician installs LC, SC, ST, FC, FDDI, SMA and MPO/MTP connectors, for both multi-mode & single-mode fiber
● The Fiber Technician will terminate simplex & duplex jumper cord
● The Fiber Technician will terminate & breakout outside plant fiber
● The Fiber Technician will terminate indoor tight buffered multimode and single-mode fiber
● The Fiber Technician will install fan out kits including buffer tube
● The Fiber Technician will calculate end to end loss budgets in accordance with TIA/EIA standards for multimode & single-mode fiber
● The Fiber Technician will fully complete all paperwork accurately and on time specifically: timesheets, material transfers, work orders, change orders, tool transfers and others as required
● The Fiber Technician will complete any other duties as assigned
Testing
● The Fiber Technician will test using an OTDR, Fluke & EFXO
● The Fiber Technician troubleshoots using an OTDR to identify and correct problems end to end, and Network wide
Splicing
● The Fiber Technician will perform mechanical splicing with all types of fiber cable
● The Fiber Technician will perform fusion splicing with all types of fiber cable
● The Fiber Technician performs building entrance splices, maintenance space, and direct buried splices
Physical and Mental Requirements:
● The Fiber Technician must be self-motivated, positive in approach, professional and help create, develop and implement project process improvement(s).ls.
Education, Certification, License, And Skill Requirements
● Must possess a High School diploma or GED equivalent
● Must possess and be proficient with the listed tools.
● Must have Testing & Troubleshooting MMF & SMF systems experience (OTDR & PMLS)
● Prefer 3-5 years of experience in Fiber
● Prefer Industry Certifications (Corning/FOA)
● Prefer Data Center installation experience
● Prefer Mechanical and Fusion Splice experience
● Prefer OSP / Confined Space Entry experience (splicing)
● Must be able to use the following trade Tools: Screwdriver (regular and Phillips), torpedo level, tape measure, snips (with belt sheath), pliers (needle nose and channel locks), hammer, wrench set, cable stripper, flashlight and gloves. Punch tool with 110 block and 66 block blade, tone set, 6/8 position combo crimp tool, and Krone/3M/BIX.
Please share to Clark@vkoresolutions.com
From:
Clark Adam,
VKore Solutions
clark@vkoresolutions.com
Reply to: clark@vkoresolutions.com